Kebur Porcelain Mineral Cladding is a stunning option to enhance any wall either inside or out.
Available in two attractive shades; Zinc and Cream.
A third colour; Arctic is now available at special offer of 30% off until stocks last.
Tiles are 385 x 75 x 9mm (34 pieces per sq mtr)
Simply fix to the wall with Tile Adhesive and grout fill the gaps.
Mineral Cladding tiles are frost resistant and feature substantial shading variation. Porcelain cladding is also resistant to stains and chemicals, easy to clean and colour stable.
Mineral cladding can also be used as a floor tile, however it must be laid using tile adhesive onto a solid concrete base. It should also be noted that these tiles have an R10 slip rating.
How to install porcelain cladding
The tiler should also check the product for any obvious flaws before laying, which would not be covered by the guarantee if pointed out after laying.
The tiler should use adhesives which are suitable for the various types of use, and follow the instructions on the packaging.
Grout-line size can vary according to the format of the tiles, in order to maintain the preferred laying modules.
A minimum 2-3mm grout joint is recommended. When laying it is not recommended to stagger tiles by more than 6-10cm (2”-4”).
Ensure the top of walls are capped to prevent the ingress of water behind the tiles.
How to maintain porcelain cladding
For routine maintenance, we suggest a few days after installation, to clean thoroughly by using water solutions and buffered acids in order to dissolve and remove completely any construction debris.
It is also important to rinse well until the wash water turns out clean, to prevent stains difficult to remove caused by improper or late removal of the grouting used on the joints.