Aqua-Bond Adhesive is a single component moisture-curing adhesive of trowelable viscosity designed for bonding artificial grass and synthetic sports surface carpets to a variety of substrates or jointing tapes. The adhesive is tolerant to use in damp and cold conditions, with the final bonds being fully resistant to climatic conditions.
- Single component moisture-curing adhesive.
- Simple application for artificial lawn construction and repair situations.
- Applied to one surface, the adhesive exhibits high bond strength.
- Aqua-Bond Adhesive tube is 310ml and can be applied with a caulking gun.
- Green colour.
- One tube will cover approx 6m of joint.
TOTAL CARPET STICKDOWN
Ensure the sub floor is smooth, clean, sound and free from dust, loose particles or contaminants such as oil, which may affect adhesion. Dampness can be tolerated but any surface water should be removed. Aqua Bond Adhesive should be applied to the substrate and spread with a notched trowel at a coverage rate sufficient to leave ridges of adhesive high enough to transfer to the back of the carpet. In order to consolidate the bond whilst curing takes place it may be necessary either to roll the surface periodically over the next two hours or to apply weights to hold the surface in contact during this time. Open times and curing times are dependent on both temperature and humidity and will be shortened in warm,
FOR REMEDIAL WORK AND SEAM BONDED JOINTS
Aqua Bond Adhesive can be used very effectively for work involving repairs or installation of lines or joints on new areas of carpet or exising sites. The use of this one component product allows adhesive to be applied directly from the cartridge between the substrates to be rebonded. It is important that the adhesive is spread evenly by serrated trowel. The versatility of the product means it is useful for carrying out work during periods of adverse weather, i.e. in colder, wetter conditions.